All Metal Designs

ADJUSTABLE ERGONOMIC WORKBENCHES – WORKSTATIONS
Modular and Custom Engineered

Adjustable workbenches from All Metal Designs, Inc. can help meet the challenges of accommodating the needs of a diverse workforce. When working for prolonged periods of time, work surface heights should be changed every few hours when muscles need a break. Work surfaces should be free from hard or sharp edges. With the right workstation ergonomics, everyone in your workplace can be productive and comfortable. An AMD adjustable ergonomic workstation can reduce fatigue and help prevent overuse injures. Our ergonomically designed workbench bases allow you to design in adjustability to achieve the most flexible workstation for your operators.

AMD has a variety of bases, work surfaces, frames and columns for our adjustable workbenches.

Selection should be based on weight requirements (maximum weight to be lifted), the work surface needed and the preferred method of operator adjustability (manual or electric).

Options for bases include:
  • Manual Bases for Height Adjustable Workbenches
    (View our catalog area on manual bases in pdf format)

 
Single Pedestal Base

  • Height Adjustable – 12” Range (Approx. 30” to 42”)
  • 7 Gauge (3/16”) Welded Steel Construction
  • Durable Powder Coat Finish
  • Add Worksurfaces – Laminate, Maple or Steel
  • 16” x 16” Base Can be Bolted to the Floor
Dual Pedestal H Base
  • Height Adjustable – 12” Range (Approx. 30” to 42”)
  • 7 Gauge (3/16”) and 11 Gauge (1/8”) Welded Steel Construction
  • Durable Powder Coat Finish
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories
Single Pedestal Delta Base
  • Height Adjustable – 12” Range (Approx. 30” to 42”)
  • 7 Gauge (3/16”) and 11 Gauge (1/8” Welded Steel Construction)
  • Durable Powder Coat Finish
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories
  
Single Pedestal H Base
  • Height Adjustable – 12” Range (Approx. 30” to 42”)
  • Front Adjustment Standard (Side Adjustment also Available at No Charge – Please Specify)
  • 7 Gauge (3/16”) and 11 Gauge (1/8” Welded Steel Construction)
  • Durable Powder Coat Finish
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories
Adjustable Table Base

  • Height Adjustable – 12” Range (Approx. 30” to 42”)
  • 11 Gauge (1/8”) Welded Steel Construction
  • Durable Powder Coat Finish
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories
Dual Pedestal Delta Base
  • Height Adjustable – 12” Range (Approx. 30” to 42”)
  • 7 Gauge (3/16”) and 11 Gauge (1/8” Welded Steel Construction
  • Durable Powder Coat Finish
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories

  • Stationery Bases for Ergonomic Workstations
    (View our catalog area on stationary bases in pdf format)

 
Pin-in-Hole
  • Height Adjustable – 8” Range (Approximately 29” to 37”)
  • 11 Gauge (1/8”) Welded Steeel Construction
  • Durable Powder Coat Finish
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories
  
Fixed Hinge Base
  • Base Height – 35”
  • 11 Gauge (1/8”) Welded Steel Construction
  • Durable Powder Coat Finish
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories

  • Electric Bases for Adjustable Workbenches
    (View our catalog area on electrical bases in pdf format)

 
Z Base
  • Height Adjustable – 12” Range (Approximately 30” to 42”)
  • 11 Gauge (1/8”) Welded Steel Construction
  • Durable Powder Coat Finish
  • All Units Include Base & Electric Drive
  • Hi-Lo Targets Standard
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories
AHT Bases – Dual Actuators
  • Height Adjustable – 12” Range (Approx. 30” to 42”)
  • 11 Guage (1/8”) Welded Steel Construction
  • Durable Powder Coat Finish
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories
  
Z Base Dual Actuators
  • Height Adjustable – 12” Range (Approximately 30” to 42")
  • 11 Gauge (1/8”) Welded Steel Construction
  • Durable Powder Coat Finish
  • All Units Include Base & Electric Drive
  • Hi-Lo Targets Standard
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories
AHT Bases – Quad Actuators
  • Height Adjustable – 12” Range (Approx. 30” to 42”)
  • 11 Gauge (1/8’) Welded Steel Construction
  • Durable Powder Coat Finish
  • Add Worksurfaces – Laminate, Maple or Steel
  • Accepts Workstation Frames / Accessories

AMD has a variety of bases that allows you to specify what type of adjustable ergonomic workbench or workstation configuration would best meet your requirements. Please visit our modular workbench page to see how to design an AMD system.



0
Home
0
On-Line Workstation
  Catalog
0
Ergonomic Industrial
  Workbenches
0
Adjustable Workbenches
0
Assembly Workbenches
0
Modular Workbenches
0
Privacy
0
Contact
0


   

All Metal Designs, Inc.

700 Windcrest Drive · Holland, MI 49423
Phone: 616.392.3696 · Fax: 616.392.2922


ERGONOMIC WORKSTATIONS / WORKBENCHES:

Industrial | Adjustable | Assembly | Modular
ON-LINE WORKSTATION CATALOG
Home | Privacy Statement | Contact

This site created and maintained by American Web Page, L.L.C. (www.awpg.com)
Copyright© 2004 - 2008 · ALL RIGHTS RESERVED.